Looking for a Tub To Shower Conversions?

By johnhrq Looking for a Tub To Shower Conversions? Custom Tag

If you have decided to convert your bathroom tub for a shower, then you are in the right path of tending your home. Researches by industry experts point out that the tub-less bathrooms are immensely becoming popular these days. However, if you are particular about the marketability of your home, then it is advisable to retain at least one tub in one of your bathrooms. Most real estate professionals tell you can never sell your home without a tub. While planning to go for tub to shower conversion, you can think of a cool walk in shower in place of the old tub.

For those planning to have a simple kind of tub to shower conversion, the project is quite simple. If the tub is removed from an alcove, then you are most likely to have an existing space that is 5 feet wide and 30 to 34 inches deep. This is a space good enough for a shower. You just have to do some minor modifications and ensure the drains and plumbing lines fall in shape so that you can immensely save on the plumbing costs.

Those that have free standing tubs that are to be replaced might need to plan a bit more. Most free standing tubs are found near windows. Therefore it is but natural for anyone to avoid windows near the shower enclosure. This will mean planning the shower in a different location. At the same time, you will need to plan the new location as close as possible to the existing plumbing and drain lines so that you do not have to waste money on these issues. Remember moving the plumbing lines to the new location can cost you a lot of additional money.

The codes for buildings note that the floor space of a shower stall needs to be at least 30 inches by 30 inches, whereas the ideal measurement would be 36 inches by 36 inches. By adding a short section of wall, you can achieve 36 inches deep space. The finished ceiling height must be not less than 80 inches. There should be at least 15 inches of space from the center of the toilet to the wall while what is recommended is 18 inches. The ideal distance between the front of the toilet bowl to the wall is 30 inches. If you have door swing problems, you can go for sliding glass doors.

While going ahead with the tub to shower conversion project, you need to bear a few things in mind. First evaluate the condition of your existing pipes and go for replacement if needed. Thoroughly check the subfloor and framing for rot, repairs, mold and mildew. Carryout the repairs as appropriate. Check the condition of the valves if you feel you need an upgrade, this is perhaps the right time to go for it. Installing a pressure balancing valve that can control temps and volume can be the best solution. If you want low cost options, go for shower stall kits that are economically priced and made of acrylic or fiberglass. Thus, moving forward systematically with your tub to shower conversion project can save you money as well as give you the desired results.

Safeshowers is a Leading bathroom remodeling Company In Austin, TX provides Tub To Shower Conversions and Bathroom Remodeling In Austin Texas for more Information about Bathroom Remodel Service Visit: Safeshowers.

By johnhrq October 8, 2013 10:23 Custom Tag